HD SERIES OVERVIEW
Amplifier Specifications
Product Model
FFA-2004 HD
FFA-5004 HD
FFA-8004 HD
Power Ratings Per Channel ( RMS )
Measured per channel, driven at 1 kHz sine wave, 240 VAC mains supply voltage to no more than 1% TH
Load:
Note: Channel pairs can be bridged to drive very high power 8 Ohm subwoofers
8 ohms
250 W
625 W
1000 W
4 ohms
500 W
1200 W
2000 W
2 ohms
1000 W
N/A
N/A
Product Range
Models
Datasheet
FFA-2004 HD
Exceptional Audio Performance
OVERVIEW
The FFA 2004 HD is designed for the most demanding audio applications. While ideally suited for premium cinema sound systems, it is equally at home in high-quality install projects and professional touring systems, where absolute reliability and sonic excellence are essential.
FFA’s rugged, high-current power supplies deliver effortless control over the lowest musical notes, cinematic audio effects, and dynamic live performances. The amplifier’s mechanics are engineered to the same exacting standards as FFA’s renowned professional live sound and night venue products, ensuring durability even in the most challenging environments.
The FFA 2004 HD also features a newly developed silent cooling system, making it perfectly suited for installations in noise-sensitive environments as well as demanding touring applications where reliability under pressure is critical.
Designed and made in England with a 6-year warranty
SUITABLE APPLICATIONS
Any sound system that is required to deliver the best audio performance • Long-term power delivery in any environment • Home residential cinemas • professional test screening rooms • commercial cinemas • Live theatre sound • Conference rooms • AV systems • night venues • Cruise ships • High-quality install projects and professional touring sound systems
Specifications
FFA-2004 HD
| Power Ratings | 4 x 500W @ 4 Ohms, 4 x 250W @ 8 Ohms, 4 x 1000W @ 2 Ohms Note: Channel pairs can be bridged to drive very high power 8 Ohm subwoofers |
| Gain | 20 dB |
| THD | THD+N typical 0.03% ref 4 Ohms 1 kHz |
| Frequency Response | 20Hz – 20kHz ± 0.5dB |
| Controls | 40 Point Potentiometer per channel, power on switch |
| Indicators | Signal green = -20dB, signal yellow = -3dB, red signal = clip limiter, signal red protect = over current, low AC mains or 3 sec. mute on power up |
| Load Protection | DC on output, precision clip limiter circuit |
| Amplifier Protection | Short circuit, current overload, thermal shutdown, high frequency stability circuit |
| Audio Signal Inputs | Balanced Neutrik® Female XLR input each channel Pin 1 – GND, Pin 2 – Hot +, Pin 3 – Cold |
| Audio Signal Outputs | Neutrik® speakON each channel. Channels 1 and 3 output speakON utilises 2+ and 2- connection to allow use of 4 core loudspeaker cable for bi amp loudspeaker system. Bridged output |
| Power Requirement | 1 x Neutrik® 20A powerCON connector 1 x 16A 230 VAC Circuit. Power range 185V-230VAC, 120V (configured at factory) |
| System Cooling | High CFM 80mm fan with proportional signal speed control. Rear to front airflow |
| Dimensions | 88mm Height x 483mm Width x 510mm Depth. Includes rear rack support. 19″ rack mount enclosure |
| Weight | 10 kg |
FFA has a policy of continued product improvement and accordingly reserves the right to change features and specifications without notice.
Datasheet
FFA-5004 HD
Exceptional Audio Performance
OVERVIEW
The FFA 5004 HD is designed for the most demanding audio applications. While ideally suited for premium cinema sound systems, it is equally at home in high-quality install projects and professional touring systems, where absolute reliability and sonic excellence are essential.FFA’s rugged, high-current power supplies deliver effortless control over the lowest musical notes, cinematic audio effects, and dynamic live performances. The amplifier’s mechanics are engineered to the same exacting standards as FFA’s renowned professional live sound and night venue products, ensuring durability even in the most challenging environments.
The FFA 5004 HD also features a newly developed silent cooling system, making it perfectly suited for installations in noise-sensitive environments as well as demanding touring applications where reliability under pressure is critical.
Designed and made in England with a 6-year warranty.
SUITABLE APPLICATIONS
Any sound system that is required to deliver the best audio performance • Long-term power delivery in any environment • Home residential cinemas • professional test screening rooms • commercial cinemas • Live theatre sound • Conference rooms • AV systems • night venues • Cruise ships • High-quality install projects and professional touring sound systems
Specifications
FFA-5004 HD
| Power Ratings | 4 x 1250W @ 4 Ohms, 4 x 625W @ 8 Ohms Note: Channel pairs can be bridged to drive very high power 8 Ohm subwoofers |
| Gain | 32 dB |
| THD | THD+N typical 0.03% ref 4 Ohms 1 kHz |
| Frequency Response | 20Hz – 20kHz ± 0.5dB |
| Controls | 40 Point Potentiometer per channel, power on switch |
| Indicators | Signal green = -20dB, signal yellow = -3dB, red signal = clip limiter, signal red protect = over current, low AC mains or 3 sec. mute on power up |
| Load Protection | DC on output, precision clip limiter circuit |
| Amplifier Protection | Short circuit, current overload, thermal shutdown, high frequency stability circuit |
| Audio Signal Inputs | Balanced Neutrik® Female XLR input each channel Pin 1 – GND, Pin 2 – Hot +, Pin 3 – Cold |
| Audio Signal Outputs | Neutrik® speakON each channel. Channels 1 and 3 output speakON utilises 2+ and 2- connection to allow use of 4 core loudspeaker cable for bi amp loudspeaker system. Bridged output |
| Power Requirement | 1 x Neutrik® 20A powerCON connector 1 x 16A 230 VAC Circuit. Power range 185V-230VAC, 120V (configured at factory) |
| System Cooling | High CFM 80mm fan with proportional signal speed control. Rear to front airflow |
| Dimensions | 88mm Height x 483mm Width x 510mm Depth. Includes rear rack support. 19″ rack mount enclosure |
| Weight | 10 kg |
FFA has a policy of continued product improvement and accordingly reserves the right to change features and specifications without notice.
Datasheet
FFA-8004 HD
Exceptional Audio Performance
OVERVIEW
The FFA 8004 HD is designed for the most demanding audio applications. While ideally suited for premium cinema sound systems, it is equally at home in high-quality install projects and professional touring systems, where absolute reliability and sonic excellence are essential.
FFA’s rugged, high-current power supplies deliver effortless control over the lowest musical notes, cinematic audio effects, and dynamic live performances. The amplifier’s mechanics are engineered to the same exacting standards as FFA’s renowned professional live sound and night venue products, ensuring durability even in the most challenging environments.
The FFA 8004 HD also features a newly developed silent cooling system, making it perfectly suited for installations in noise-sensitive environments as well as demanding touring applications where reliability under pressure is critical.
Designed and made in England with a 6-year warranty.
SUITABLE APPLICATIONS
Any sound system that is required to deliver the best audio performance • Long-term power delivery in any environment • Home residential cinemas • professional test screening rooms • commercial cinemas • Live theatre sound • Conference rooms • AV systems • night venues • Cruise ships • High-quality install projects and professional touring sound systems
Specifications
FFA-8004 HD
| Power Ratings | 4 x 2000W @ 4 Ohms, 4 x 1000W @ 8 Ohms Note: Channel pairs can be bridged to drive very high power 8 Ohm subwoofers |
| Gain | 28 dB |
| THD | THD+N typical 0.03% ref 4 Ohms 1 kHz |
| Frequency Response | 20Hz – 20kHz ± 0.5dB |
| Controls | 40 Point Potentiometer per channel, power on switch |
| Indicators | Signal green = -20dB, signal yellow = -3dB, red signal = clip limiter, signal red protect = over current, low AC mains or 3 sec. mute on power up |
| Load Protection | DC on output, precision clip limiter circuit |
| Amplifier Protection | Short circuit, current overload, thermal shutdown, high frequency stability circuit |
| Audio Signal Inputs | Balanced Neutrik® Female XLR input each channel Pin 1 – GND, Pin 2 – Hot +, Pin 3 – Cold |
| Audio Signal Outputs | Neutrik® speakON each channel. Channels 1 and 3 output speakON utilises 2+ and 2- connection to allow use of 4 core loudspeaker cable for bi amp loudspeaker system. Bridged output |
| Power Requirement | 1 x Neutrik® 20A powerCON connector 1 x 16A 230 VAC Circuit. Power range 185V-230VAC, 120V (configured at factory) |
| System Cooling | High CFM 80mm fan with proportional signal speed control. Rear to front airflow |
| Dimensions | 88mm Height x 483mm Width x 510mm Depth. Includes rear rack support. 19″ rack mount enclosure |
| Weight | 10 kg |
FFA has a policy of continued product improvement and accordingly reserves the right to change features and specifications without notice.